Five Minute Facts
Preventing Crisis on the High Seas by Adding Infrared Windows Inspection Capability
Most would agree that infrared thermography is a widely accepted preventive maintenance technology, both for land-based facilities and maritime applications…
- Karen Fox
- IRISS
Work Order Is Closed… so That CBM Problem Must Be Fixed, Right?
You may or may not know about work order completion but on your next measurement you find...
- Dick Hancock
- 24/7
Applying Ultrasound Inspection to Diesel Engines
Internal combustion engines burn fuel and, regardless of size, they require air, preferably clean. The air we breathe is the same air engines breathe…
- Allan Rienstra
- SDT International
Why is a Crystal IR Lens Not Suitable for Industrial Applications?
This is a very dangerous statement to make especially when we already know that crystals cannot take any form of impact, yet alone resist the force present during an Arc Flash Incident...
- Martin Robinson
- IRISS Inc.
Shaft Alignment Concepts: Offset And Angularity
There are two forms of misalignment: offset and angular. It is likely that if a piece of machinery is suffering from one of the five negative effects of misalignment...
- Stan Riddle
- Acoem USA
Maximize Wire Rope Life
Right Lubricant + Right Application Method = Long Life...
- John Sander
- Lubrication Engineers
Are You “Crying Wolf” About Problems Found With Condition Monitoring?
How many times have you called an equipment problem well ahead of time, but the equipment still fails in service due to no follow-up?
- Dick Hancock
- 24/7
Maximize Open Gear Life
Large open gears on grinding and pulverizing mills present significant lubrication challenges due to the high-load, heavy-shock nature of the applications and constant exposure to harsh
environmental conditions...
- John Sander
- Lubrication Engineers
Anatomy of an ARC Flash
An Arc Flash is an energy discharge that forms when a fault occurs in an electrical circuit...
- Martin Robinson
- IRISS Inc.