10 Minute Talk
MQTT and Other IIoT Protocols
When we at PRUFTECHNIK wanted to join the IIoT world, we did some research on protocols and standards. Let’s go over a few of the ones we looked at…
- Sven Fleischer
- Easy-Laser AB
Sleeve-Bearing Monitoring at Slow-Variable Speed Using FDS Technology
Sleeve bearings are typically found in our most critical assets. There often is not adequate instrumentation on them, and they are difficult to monitor...
- Dries Van Loon
- NanoPrecise
Averaging and the FFT
When collecting vibration data with an FFT analyzer, a linear averaging process is used to reduce noise in the vibration spectrum. This video discusses signal processing, averaging and the Fast Fourier Transform in the vibration data collector..
- Jason Tranter
- Mobius Institute
So You Think You Want an Online Monitoring System?
If you’re interested in implementing online monitoring in your plant, there are several things to consider. Ian Liebler explains…
- Ian Liebler
- Emerson Automation Solutions
Turbo Machinery 101
Salah Attia tells us about different types of turbines and the alarm levels that should be set to protect these critical machines…
- Salah Attia
- ALS Industrial
When Vibration from Trains Damages Buildings
In large cities in India, such as Delhi, metros cause a lot of damage to buildings. Stories have appeared on the news of people who have to repair their houses again and again…
- Ashish Arora
- Institute of Noise & Vibration
Measurement Sensors and Applications for Measuring Turbo Machinery
When measuring turbo machinery, measurement types include casing absolute vibration, shaft relative vibration, and shaft absolute vibration…
- Salah Attia
- ALS Industrial
Installing Wireless Monitoring on Overhead Cranes
Compared to most applications, wireless monitoring of overhead cranes is quite challenging. We need high-speed sampling for fault detection. And because this is a low-speed application…
- Kris Deckers
- I-care Group
Condition-Based Inspection Models for Electrical Equipment
Condition-based inspection models utilize condition-based monitoring technologies to inspect electrical equipment assets. One technician can do three jobs in two minutes. These methods include…
- Paul Goodbody
- IRISS