Webinars
Implementation of CBM for a Successful Predictive Maintenance Program
This presentation is about, how can we use every person in the factory as a condition monitoring engineer and that the condition monitoring does not require any specialization or higher education. Rather what it requires is the common sense and the slight knowledge of maintenance..
- Vinay Sharma
- Onyx Dynamic Balancing Services
What is Deenergized Motor Circuit Analysis (MCA)?
Motor testing is integral to the success and efficiency of your business. Its capabilities for troubleshooting and predictive maintenance are a means of sustaining critical systems and achieving meaningful Return On Investment (ROI)..
- Mark Koch
- ALL-TEST Pro, LLC
How To Avoid Bearing Problems In The First Place
In this Webinar, we will discuss a number of ways that we can avoid bearing failures. The topics will range from spares management, installation practices, lubrication practices, and operating practices. We will also discuss how we can detect the root causes so we can eliminate them before the bearing is harmed, and how we can learn from failures to avoid them in the future. It won't be a short Webinar, but it will be informative!
- Jason Tranter
- Mobius Institute
Using Motor Current Signature To Detect The Number Of Cracked Rotor Bars In Induction Motors
This presentation will not only focus on collecting current signature , but also will cover the analysis part of spectral data to determine the number of cracked/broken bars along with the severity level and needed corresponding corrective actions . This will be clearly shown through two real case studies in my plant for two 1.2 MW induction motors.
- Mohamed Wahba
- EzzSteel
Bearing Failure Root Cause Analysis
This presentation introduces the concept of HD condition monitoring technology, showing how it has been used to detect bearing damage in a low-speed gearbox. The presentation describes the spalling process in bearings with supporting photos of real bearing damages and suitable techniques for early damage detection.
- Tim Sundstrom
- SPM Instrument
Don’t Start That Motor!
Before you start a new or refurbished motor there are a few critical things that should be checked to prevent reduced life expectancy or an outright failure.
- Noah Bethel
- PdMA Corporation
Estimating the Remaining Life of a Rolling Element Bearing with Vibration, Ultrasound, Oil, and Infrared Analysis
In this animated presentation, Jason will explain how vibration analysis, ultrasound, oil analysis and wear particle analysis, as well as infrared analysis, can be used to detect rolling element bearing faults and provide an indication of the remaining life of the bearing. Using these condition monitoring techniques correctly, it is possible to detect a bearing fault a year or more before it would ultimately fail. But using these technologies, it is possible to look for signs that indicate the approximate remaining life.
- Jason Tranter
- Mobius Institute
Torque: Demystification & Application
This webinar will describe this electromechanical system operation and the development of a torque waveform which can be used to identify specific mechanical faults associated with the motor and the load.
- Leslie Reed
- Megger Baker Instruments
How to Use Condition Based Analysis to Solve Your Equipment Failures
We live in challenging times. This is particularly true in the predictive maintenance world, and acutely true in the area of vibration analysis. Today, most manufacturing sites have active reliability programs in place with the means of measuring plant performance and processes to find and correct repetitive problems that effect plant uptime...
- Bob Martin
- IMI Sensors