Ultrasound

What’s New
10 Minute Talk
  • Ultrasound

Five Towns Underground Leak Detection Survey: Using Infrared and Ultrasound

Five Towns is a large 55+ community with 1701 condo units and 6 pools. The maintenance manager detected a leak, and the test came back inconclusive. See how the leak was fixed using infrared and ultrasound systems...

10 Minute Talk
  • Ultrasound

The Power of Two: Infrared and Ultrasound CBM Technologies

Combining ultrasound and infrared testing methods is the safest and most un-intrusive way of testing that allows inspectors to easily see, hear, and record areas of concern that have been difficult to detect before...

Five Minute Facts
  • Ultrasound

How Ultrasound Technology Was Used To Locate Low-Level Leaks in Heat Exchangers

Ultrasonic leak detection has been used for a variety of applications ranging from energy reduction by locating compressed air leaks to quality assurance inspections, such as locating wind noise and water leaks in automobiles...

Interviews
Airborne and structure-borne ultrasound
  • Ultrasound

Advances in Airborne and Structure-Borne Ultrasound Over Two Decades

In this interview with US Army veteran Drew Walts, CBM CONNECT discusses the advances in airborne, and structure-borne ultrasound, along with the importance of the critical angle of an electrical fault…

White Papers
  • Ultrasound

Leak Management of Compressed Air Systems Using Ultrasound

Compressed air is used as a source of energy in a lot of sectors. This is due not least to the fact that compressed air is relatively easy to produce and transmit, but the provision of compressed air often involves considerable losses...

Case Studies and Stories
  • Ultrasound

Save Energy in Steam and Condensate Systems

The oldest paper mill still operating in Germany detects defective steam traps with digital ultrasonic testing technology…

Five Minute Facts
  • Ultrasound

The Benefit of Time Signal vs FFT for Slow-Speed Bearing Testing

Slow-speed bearings under 300 RPM take a long time to accumulate data when using vibration analysis. Ultrasound can be used as the front-line tool to determine quickly what is occurring...

Two Minute Tips
  • Ultrasound

Testing Thermodynamic Disc

When testing steam traps, we first need to make sure our temperature and pressures are set before we use any type of ultrasound. A good disc trap should cycle 4-10 times per minute; a warn disc trap will cycle ...

Five Minute Facts
  • Ultrasound

The Ultrasound Approach: VFD Drives and Condition Indicators

VFDs seem to be taking over the world; however, you may hear ultrasound inspectors complain they are having trouble interpreting data. Is there a simple assessment? Find out more in this short video…

Sponsored Content
Back to top