Five Minute Facts
Work Order Is Closed… so That CBM Problem Must Be Fixed, Right?
You may or may not know about work order completion but on your next measurement you find...
- Dick Hancock
- 24/7
Five Minute Facts
Applying Ultrasound Inspection to Diesel Engines
Internal combustion engines burn fuel and, regardless of size, they require air, preferably clean. The air we breathe is the same air engines breathe…
- Allan Rienstra
- SDT International
10 Minute Talk
Understanding the Mechanical Process of Bearing Failures with Respect to Modern Vibration Analysis
This presentation deals with how failures can be avoided in wind turbines and bearings and provides animations…
- Ron Kittle
- SPM Instrument Inc
Articles
Thermal Tuning
Your images are very nice, like the ones shown below. After all, you tell yourself, if there was a serious problem I would have seen it...
- Luca Del Nero
- DarkWave Thermo
Two Minute Tips
Contact Fatigue
Where does contact fatigue occur? Particle-induced fatigue pitting can occur anytime clearance-sized particles exist…
- Mark Barnes
- Des-Case
Two Minute Tips
Low Power Factor
Motors are designed to operate between 50 and 100% of rated load…
- Richard Scott
- ALL-TEST PRO
Two Minute Tips
What to Look for in a Quality Breather
There are many variations of breathers to choose from. Here are a few things to look for when choosing a quality breather:
- Preston Rubottom
- Lubrication Engineers
Two Minute Tips
Know Your Spatial Resolution
Spatial Resolution is also known as the Instantaneous Field of View (IFOV) or Spot Size. The limitations of the spatial resolution are due to…
- Martin Robinson
- IRISS Inc.
Two Minute Tips
Machine Train: Belts
Continuing the focus on the machine train analysis tools of the EMAX Current Demodulation technology, this tip discusses belts...
- Noah Bethel
- PdMA Corporation
