Two Minute Tips
Shaft Alignment Know-How: 5-Step Shaft Alignment Procedure
A simple and effective procedure for doing shaft alignment of rotating machinery.
Two Minute Tips
Causes of High Oxidation
While some new oils may produce an oxidation value due to the presence...
Two Minute Tips
Electric Motor Grease Application
Common problems when greasing electric motors include over greasing, under greasing and not greasing at all – all of which can lead to premature electric motor failures. Additionally, operators often have to manually grease in hard-to-reach or unsafe areas...
- Preston Rubottom
- Lubrication Engineers
White Papers
NFPA 70E 2018 Edition – Changes and Implications for Personnel Performing Condition Based Maintenance Tasks
The 2018 Edition of NFPA 70E Standard for Electrical Safety in the Workplace, was released in late 2017 with little fanfare. However, there are several significant changes in this edition that have potentially wide-ranging implications for maintenance personnel...
- Rudy Wodrich
- IRISS
Interviews
How Can You Benefit from HD Technologies?
In this interview with Ron Kittle, CBM CONNECT examines the cutting edge development of HD Technologies and how this impacts the vibration world. How will you be affected by Industry 4.0, smart factories, and HD Technologies...
- Ron Kittle
- SPM Instrument Inc
Two Minute Tips
What is the Rotor Influence Check (RIC)?
Six independent methods of rotor evaluation can be used from the MCEMAX technology to analyze the condition of a squirrel cage AC induction motor...
- Noah Bethel
- PdMA Corporation
Two Minute Tips
Sonus XT-Pocket Ultrasonic Testing Device
Six independent methods of rotor evaluation can be used from the MCEMAX technology to analyze the condition of a squirrel cage AC induction motor...
- Drew Walts
- IRISS
Two Minute Tips
Ultrasound Assisted Lubrication Basics
3 ways to Incorporate Ultrasound into Bearing Lubrications...
- Adrian Messer
- UE Systems
Interviews
My Passion: Safe and Efficient Electrical Inspection Programs
CBM CONNECT sat down with Martin Robinson and discussed the reasons behind why you should switch from a calendar-based maintenance program to a condition-based program. What are the pro’s? What are the costs involved...
- Martin Robinson
- IRISS Inc.
