Bill Kruger

What’s New
Two Minute Tips
  • Motor Testing

Motor Overload

Motor overloads occur when motors are drawing too much current. The main issue with excess current is that it creates heat which degrades the insulation surrounding the conductors that creates stator magnetic field.

Webinars
  • Motor Testing

Establishing an Effective Motor Management System by Combining Permanent or Portable Motor Testing

This webinar will briefly discuss the various technologies traditionally used to determine the condition of the electric motors that drive these machines that produce many of the products and services required in today’s world.

Five Minute Facts
  • Motor Testing

How to Check Your Windings on Three Phase Motors

Motor windings are conductive wires wrapped around a magnetic core; they provide a path for current to flow to create then magnetic field to spin the rotor. Like any other part of the motor, the winding can fail.

Five Minute Facts
  • Motor Testing

Motor Acceptance Testing

Motor acceptance testing is a critical part of many preventive maintenance programs and can be key to catching electrical problems before they cause considerable downtime.

Webinars
  • Motor Testing

Eliminate Bad Motors with Incoming Inspection

MOBIUS CONNECT WOW North America (Week of Webinars) Presents: Eliminate Bad Motors with Incoming Inspection.

Five Minute Facts
  • Motor Testing

Electrical Insulation Failure

Electrical Insulation is used to direct current through a desired path and prevent it from flowing where it is not desired. Proper electrical insulation is critical to an electric motor’s performance and longevity.

Webinars
  • Motor Testing
  • Vibration Analysis

Using ESA to Locate Loose Bearing, That was Undetectable Using Vibration

This webinar will present the analysis process accompanied by the description of the electrical and mechanical theories and forces that explain “Why machinery vibration wasn’t able to measure this condition”.

Case Studies and Stories
  • Motor Testing

Case Study: Loose Power Connections

A conveyor motor was tested during an annual inspection that operated in the part transfer line. Annual testing for the plant was conducted during a scheduled shut down. Using the automated
routes mode of the & MCA™ Software.

Webinars
  • Motor Testing

Eliminate Bad Motors with Incoming Inspection

MOBIUS CONNECT WOW Middle East (Week of Webinars) Presents: Eliminate Bad Motors with Incoming Inspection.

What's Coming
Sponsored Content
Back to top