CBM
Interviews
Adding Ultrasound Monitoring to Bearing CBM
Peter Eitnier of Wilcoxon talks about why vibration monitoring practitioners are adding ultrasound to their CBM program and how precision lubrication can extend the life of bearings.
- Peter Eitnier
- Wilcoxon Sensing Technologies
Webinars
Bearing Precision Lubrication and CBM using Vibration Monitoring and Ultrasound Detection
Under- and over-lubrication contributes to 40-70% of bearing failures. Precision lubrication can be achieved with ultrasound analysis and supported with vibration root cause analysis. Ultrasound monitoring can be used to hear and analyze the friction index of each bearing, indicate the precise amount of lubrication required, and extend the life of the bearing.
- Peter Eitnier
- Wilcoxon Sensing Technologies
Webinars
Selecting the Best Vibration Monitoring Method for Your Rotating Machinery
Join Mark Frogley explore how to maximize the potential of your machinery and your organization with the latest advancements in wireless, wired, and route-based vibration monitoring technologies..
- Mark Frogley
- Acoem USA
Articles
The Disturbing Direction of Condition-Based Monitoring
Terms like predictive maintenance, condition based maintenance, and reliability-centered maintenance, have undergone commercially-driven changes for over 30 years...
- Howard Penrose
- MotorDoc LLC
Webinars
Understanding the Benefits and Capabilities of Different Vibration Sensor Technologies in A CM System
In this webinar attendants will be able to gain insight about why sensor specific maintenance platforms are becoming a thing of the past, how vibration sensors and systems modular integration works, and provide insight on data normalization, sensor observability, sensor use per application and sensor response manipulation.
- David Bukowitz
- SensOS
Webinars
The Gear Necessities – Why You Should Be Using Condition Based Monitoring
Gearbox maintenance is often based on a fixed schedule or run to failure. Under these two factors maintenance can be costly & wasteful and often occurs too early or too late. The solution to these efforts is condition-based monitoring.
- Bernie Hall
- Checkfluid
Webinars
How to Put CBM to Work Using Edge AI
In this webinar, we will examine the key challenges for CBM and look at how edge AI and high frequency vibration data can help you break the walls.
- Vikas Kumar Singh
- Macnica
Interviews
Ultrasound in CBM for Energy Savings
In this interview we will be talking all about Ultrasound. Syed breaks down why ultrasound used in a CBM Program, how is it for energy and fuel savings and how electrical losses can be prevented though ultrasound.
- Syed Munawer Hasan
- Plant Asset Efficiency Solutions
Interviews
CbM Technology Trends and Solution Requirements
Dara O’Sullivan, System Applications Manager at Analog Devices, answers questions about technology trends in Condition based Monitoring as well as how to get application insights and choose the best sensing solution for your system requirements.
- Dara O'Sullivan
- Analog Devices, Inc
