condition monitoring
Interviews
Editorial Board Spotlight – Tim De Block
In this interview, Tim De Block shares how he got started in the vibration field, along with the possibilities for growth with PDM and what the future looks like for the condition monitoring industry…
- Tim De Block
- Fyraco Solutions
Case Studies and Stories
Duke Energy Takes Advantage of IIoT for Predictive Maintenance Applications
This case study investigates Duke Energy’s quest to replace its monthly, manual data collection practices with daily, remote data collection and monitoring.
- Alex West
- IHS Markit
Webinars
Overcoming VFD Condition Monitoring Challenges With Ultrasound
The prevalence of Variable Frequency Driven motors (VFDs) is on the rise and causing quite a concern for condition monitoring technicians. In this free webinar, you'll discover the role ultrasound plays in determining stage 1 and 2 bearing failures...
- Bob Lees
- SDT
Two Minute Tips
Mechanical Looseness on a Spectrum
There are three types of mechanical looseness. In this quick tip, we will take a look at all three and what the causes are...
- Brian Shanovich
- ACOEM
Two Minute Tips
Machine Info Needed Prior to Measurement
Before a CM program can take place, certain information needs to be recorded on a machine assembly…
- Tim Sorensen
- ACOEM
White Papers
Leveraging IoT for Condition-Based Maintenance
Let's start with the basics. What is condition-based Maintenance? Condition-based maintenance (CBM) is a maintenance strategy that ...
- Jay Cooper
- Des-Case
Interviews
Electrical Safety & Holistic Condition Monitoring
In this interview with Martin Robinson, we discuss the evolution of electrical safety and key safety tips that can save your life...
- Martin Robinson
- IRISS Inc.
Webinars
Improved Condition Monitoring and Reliability with Ultrasound
This presentation will deliver information on using ultrasound for mechanical inspections including bearings and condition based lubrication to prevent over/under lubrication of bearings...
- Doug Waetjen
- UE Systems
Five Minute Facts
Work Order Is Closed… so That CBM Problem Must Be Fixed, Right?
You may or may not know about work order completion but on your next measurement you find...
- Dick Hancock
- 24/7
