dB
White Papers
The Wearable for Machine Health: Condition-Based Monitoring
Condition-based monitoring (CbM) is the Industry 4.0 equivalent of wearable fitness devices. With the explosion of connectivity comes the opportunity to observe the physical world like never before and to see physical processes in action, in real time, in fine detail. In industrial....
- Stuart Servis
- Analog Devices
Five Minute Facts
Ultrasound: Is the Sound Good or Bad?
How many of you have walked through your plants and heard a strange noise coming from somewhere? You may have noted that it didn’t sound good. When you hear those noises…
- Christopher Hallum
- UE Systems Europe B.V.
White Papers
Selecting Vibration Sensors
Selecting the best accelerometer for a specific predictive maintenance application can be a daunting task – even for the most seasoned walk-around warrior…
- Meredith Christman
- PCB Piezotronics
Case Studies and Stories
A Hoist Application in the Mining Industry
A hoist or winder is a mission critical application found in underground mines. The hoist is used either to transport ore to the surface or personnel to or from the mine shaft. There are three types of hoists...
- Tim Sundstrom
- SPM Instrument
Articles
Using Ultrasound to Improve Lubrication Practices
Keeping a handle on lubrication is easy, right? All one needs to do is make sure the right lubricant is used in the right amount and at the right time. Not so fast; if only it were that simple...
- Adrian Messer
- UE Systems
Articles
Ultrasound Assisted Lubrication: Three Ways to Improve Lubrication Practices
Take great care to avoid introducing contaminants into the lubrication. To monitor how much grease you are using, calibrate your grease gun: there is a device that attaches to your grease gun and gives you an LED reading of how much grease you’re using, mass-wise...
- Adrian Messer
- UE Systems
10 Minute Talk
Ultrasound Assisted Lubrication
Improper bearing lubrication is responsible for several issues, such as increased lubricant usage, increased bearing purchases (due to failures), increased equipment failures, increased operating temperatures, and motors that run inefficiently.
- Adrian Messer
- UE Systems
