gearbox
Case Studies and Stories
A Most Unusual Problem Solved by Reliability-Focused Common Sense
The vibration and oil data for the gearbox in this Gypsum stirrer was normal. But we knew something was wrong. A borescope camera showed us something astounding...
- Matthew Fallow
- Asset Quality
Case Studies and Stories
How We Diagnosed Our Cooling Water Pump Gearbox
This case study comes from a custom-made, four-story-high pump at Engro Fertilizers. In January 2014, we started noticing abnormal noise and vibration from the gearbox. But we couldn’t see anything apart from an increased gear mesh frequency…
- Haider Ali
- Engro Fertilizers
Case Studies and Stories
The Journey to World-Class Storage & Handling – Basic American Foods
When Scott Fischer, Maintenance Manager, joined Basic American Foods, he recognized that the Blackfoot Basic American Foods plant was in need of a dedicated lubricant storage and handling process and products to support his reliability program goals.
- Mark Barnes
- Des-Case
White Papers
Technology Based Crane Monitoring and Diagnostics
Overhead cranes are often a single source cause of downtime in any manufacturing facility, especially when discussing those performing services in a steel mill’s melt shop. Often, these assets do not have redundancy that would allow for one to be taken....
- Stephen Bailey
- IVC Technologies
Two Minute Tips
Maintenance Tips for Cooling Towers
View a few maintenance tips for protecting cooling towers and stopping any unplanned downtime with your equipment. Knowing the best detection technologies available today and how these can best be used, maintenance engineers can not only prevent failure but also significantly maximize machine uptime.
- Chris Hansford
- Hansford Sensors
White Papers
Cracking the ISO Code to Lubricant Cleanliness
So what does it really mean to increase lubricant cleanliness? We read various articles and textbooks that talk about how increasing the cleanliness of an in-service oil will increase the life of a component and the lubricant, but how do we make that happen...
- Mark Barnes
- Des-Case
Two Minute Tips
Lubrication of Gear Reducers
Gear reduction is part of the basic power transmission flow in any industry. In the basic unit group consisting of power sources, gear reduction and various types of couplings, gear reduction is a very important factor........
- Daniel Roberts
- Lubrication Engineers
10 Minute Talk
HD Technology Saves an Extruder Gear Pump
A gear pump was used in a plastic extruder, where the gear’s head pumps the plastic mold from the barrel into the pelletizer. The extruder was already fitted with a condition monitoring system, but in early 2016 our customer decided...
- Rick Verbij
- SPM Netherlands
Two Minute Tips
Service Life of Gear Oil
In this quick tip you will learn why gear oil should be removed and replaced with fresh lubricant when the oil had deteriorated or when the oil has become contaminated.....
- Daniel Roberts
- Lubrication Engineers
