gearbox
Webinars
Diagnosing Gearbox Faults with Vibration Analysis
Listen to the recorded version now! Gearboxes are one of the most critical components in many plants; either because of their replacement cost and lead-time, and/or because of the criticality of their service...
- Jason Tranter
- Mobius Institute
Case Studies and Stories
A Hoist Application in the Mining Industry
A hoist or winder is a mission critical application found in underground mines. The hoist is used either to transport ore to the surface or personnel to or from the mine shaft. There are three types of hoists...
- Tim Sundstrom
- SPM Instrument
Case Studies and Stories
Boliden Garpenberg Mine
In January 2011, New Boliden decided on a major expansion of operations at the Garpenberg mine in central Sweden, aiming to successively increase production from 1.4 million to 2.5 million tons annually...
Case Studies and Stories
Ultra-Long Pre-Warning Time on Low-Speed Drying Drum with HD Technology
The application in this case is a drying drum. The drums are heated inside and their purpose is to mix ingredients together to make grains, and to cool or dry existing grains.
Case Studies and Stories
Hydra Main Propulsion Gearbox
Once upon a time, there was a ship called the Hydra. They were suspicious that the gears or bearings in the main gearbox were failing and asked a vibration analyst to perform a test. The analyst turned to me for help...
- Jason Tranter
- Mobius Institute
Case Studies and Stories
Analytical Ferrography Forensics II
A steel mill uses this motor to drive a double reduction gearbox on a roughing mill at an input speed of 450 rpm. The motor has babbitt sleeve bearings...
Two Minute Tips
Which Is the Best Bearing Fault Detection Technique?
Now, this is a tricky question to answer…
- Jason Tranter
- Mobius Institute
Webinars
Utilizing Vibration Analysis to Detect Gearbox Faults
An introduction to analyzing gearboxes using time waveform analysis, circle plots, Time Synchronous Averaging (TSA) and other techniques.
- Jason Tranter
- Mobius Institute
Case Studies and Stories
Condition Monitoring of Ball Mill with HD Technologies
After long discussions, both plants decided to switch from the VCM system to the newer Intellinova system - and with fabulous results, which are highlighted in chapter...
- Robbert de Rouw
- SPM Instrument BV
