reliability
Five Minute Facts
Rotor Bar Fault Progression with Load
Rotor bar anomalies are difficult to identify and when they are identified the available data can be confusing and misinterpreted. This instructional presentation describes what effects load will have on spectral data associated with rotor bar anomalies.
- Don Donofrio
- The Snell Group
Case Studies and Stories
Duke Energy Takes Advantage of IIoT for Predictive Maintenance Applications
This case study investigates Duke Energy’s quest to replace its monthly, manual data collection practices with daily, remote data collection and monitoring.
- Alex West
- IHS Markit
Two Minute Tips
The Enemy of Reliability: Over Lubrication
Up to 40% of bearings are killed by over lubrication, and another 10–20% are killed by under lubrication. If this is true at your facility, the fault is caused by human error...
- Tom Murphy
- SDT
Two Minute Tips
Understanding Crest Factor
Crest Factor is a parameter often displayed with power analysis data for voltage and current. This instructional presentation will give you an understanding of what Crest Factor is...
- Don Donofrio
- The Snell Group
Five Minute Facts
You Can See It, but Can You Measure It?
Just because you can see an anomaly does not mean you can radio-metrically measure it using an infrared camera. The concept of spatial and measurement resolution is one of several reasons and will be briefly described in this 5-minute fact...
- Roy Huff
- The Snell Group
White Papers
A Case for Capturing and Analyzing Trends in Your Alignment Data
It is well known that misalignment is one of the greatest causes of failure in rotating equipment. In fact, research demonstrates that more than 50% of machine breakdowns are the direct result of poor alignment...
- Grant Dennler
- PRUFTECHNIK
White Papers
Leak Management of Compressed Air Systems Using Ultrasound
Compressed air is used as a source of energy in a lot of sectors. This is due not least to the fact that compressed air is relatively easy to produce and transmit, but the provision of compressed air often involves considerable losses...
- Steffen Moeck
- SONOTEC
Webinars
How to Use Oil Analysis and Condition Management to Improve Hydraulic System Reliability
Have you been skimping on quality and ignoring the health of hydraulic oils? Has your focus been on managing sump level and particle contamination instead? Tune in to this complimentary live webinar to see examples of what you need to achieve fluid cleanliness and create chemical stability…..
- Jarrod Potteiger
- Des Case
Webinars
Three Key Metrics to Drive CBM and Reliability Decision Making
How do you decide which equipment requires RCM analysis, condition monitoring testing, reliability improvement tasks, repair priority, on-site spares, and other resources? Find out in this free webinar…
- Jason Tranter
- Mobius Institute
