Salah Attia
Five Minute Facts
Do’s and Don’ts of Writing Condition Monitoring Reports
There is a right way and a wrong way to write a condition monitoring report. Let’s go over some dos and don’ts…
- Salah Attia
- ALS Industrial
10 Minute Talk
Turbo Machinery 101
Salah Attia tells us about different types of turbines and the alarm levels that should be set to protect these critical machines…
- Salah Attia
- ALS Industrial
10 Minute Talk
Measurement Sensors and Applications for Measuring Turbo Machinery
When measuring turbo machinery, measurement types include casing absolute vibration, shaft relative vibration, and shaft absolute vibration…
- Salah Attia
- ALS Industrial
Two Minute Tips
Gland Steam Fan Bearing Fault
One gland steam fan was running and the other was on standby. Gland steam fans should have dampers and rubber mounting under the base of the machine, but due to humidity...
- Salah Attia
- ALS Industrial
Two Minute Tips
Mill Gearbox With Broken Teeth
In this case we have a gearbox with broken teeth. The gearbox bearings were showing a bit of vibration at running speed with harmonics. The vibration levels were unusually high...
- Salah Attia
- ALS Industrial
