WearCheck
Webinars
Integrating Oil and Vibration Results
In this webinar we will explore how to integrate your oil results with the vibration data that you capture. We will highlight a few problems that are encountered in the oil analysis field and vibration field and show you how to eliminate the errors in measurement and interpretation...
- Dennis Swanepoel
- WearCheck
Five Minute Facts
Representing Your Data
Before we can represent the data, we need to ensure that we capture appropriate data. The data that we need is amplitude at a particular frequency...
- Dennis Swanepoel
- WearCheck
Webinars
The Engine Killers
When it comes to the analysis of used engine oil for condition monitoring purposes, certain contaminants are vitally important to monitor as they are often the root causes of premature oil degradation and engine failure. This Webinar will look at the role oil analysis can play in engine reliability as well as describe the contaminants that are capable of causing premature or even sudden engine failure....
- Steven Lumley
- WearCheck
Two Minute Tips
Alignment: Goal, Plan, Achieve
What do you want to achieve during alignment: precision, speed, or improved reliability of equipment? Remember, a goal without a plan is just a wish. When executing alignment, we need to properly plan the job...
- Dennis Swanepoel
- WearCheck
Two Minute Tips
Introduction to the Poor Man’s ODS
The Poor Man’s ODS will be a five-part series; today's tip is Part One: the introduction to the Poor Man’s ODS. ODS stands for operation deflection shape analysis; this is a study of how a machine is moving in relation to a fixed reference point…
- Dennis Swanepoel
- WearCheck
Interviews
Editorial Board Spotlight – Dennis Swanepoel
In this interview, we speak with Dennis about his start in vibration analysis. Dennis shares his passion for the industry and a few inside secrets…
- Dennis Swanepoel
- WearCheck
Five Minute Facts
Most Common Types of 1x Peaks and What They Mean
Vibration technicians stumble upon a high 1x peak once a week. In this short video, you will find the most common causes of a 1x peak...
- Reinier Kalp
- Wearcheck Africa
Webinars
Alignment Fundamentals – Get Your Ducks In A Row
This webinar will discuss the alignment process from the view of an alignment technician, combining 10 years of experience with utilizing various alignment tools, methods & techniques...
- Louis Peacock
- WearCheck
Five Minute Facts
When Do You Need ODS?
The study of a machine's motion is called Operational Deflection Shape (ODS). This study should be done when the machine is in a steady-state or normal operation. Find out the different types and why you would use ODS...
- Dennis Swanepoel
- WearCheck
