Wilcoxon Sensing Technologies

What’s New
Two Minute Tips
  • Vibration Analysis

Condition Monitoring Applications for Velocity Sensors

Velocity is used as a vibration measurement for most condition monitoring applications because velocity is the best overall indication of machinery health for both low-speed and intermediate-speed components.

Interviews
  • Vibration Analysis

Best Practices and Troubleshooting for Permanently Installing Accelerometers

Today we sit down with Peter Eitnier, the Senior Applications Engineer for Wilcoxon Sensing Technologies. He will be going into detail on best practices and troubleshooting for permanently installing accelerometers. Vibration sensors and acelerometers should be mounted, in general, as close as possible to the bearings. The shaft turning speed is the driving force for both the machine itself, and the vibration signal.

Listen now to hear more!

Webinars
  • Vibration Analysis

9 Accelerometer Specs You Probably Don’t Check- and When You Should!

In this webinar, you’ll learn about many of the less-frequently discussed accelerometer specifications and how, when, and why they impact the quality of your data – long after the vibration sensor has been commissioned.

Articles
  • Vibration Analysis

Your Asset Reliability Program is Only as Reliable as Your Sensor

Over the last few years, we’ve seen an increased emphasis on digital transformation by industrial operators. Large operational and machine health datasets have become a focal point to feed our optimization activities.

Webinars
  • Vibration Analysis

Bridging the Vibration Gap with Digital Vibration Monitoring

This webinar will delve into new digital solutions that allow a facility to integrate vibration trending and analysis into the existing process monitoring infrastructure.

Five Minute Facts
  • Vibration Analysis

Underwater Vibration Sensor Selection

Underwater vibration monitoring can be accomplished through various methods and sensor styles. Peter Eitnier discusses some of these methods in more depth.

Case Studies and Stories
  • Vibration Analysis

Case Study: Cooling Tower Vibration Monitoring

Cooling towers are a critical component in many process facilities and contain several pieces of rotating machinery that contribute to their operation. Motors, gearboxes, fans and shafts require vibration monitoring to provide technicians with early warning signs of impending failures that could lead to catastrophic breakdowns.

Two Minute Tips
  • Vibration Analysis

Accelerometer Maximum Cable Length Calculator

When cables between the power supply and the accelerometer are short, less than 100 feet or 30 meters, circuit capacitance usually has no significant effect on the vibration data signals. Long cables may introduce sufficient capacitance into the sensor circuit to allow vibration signal distortion and produce spurious signals.

Webinars
  • Vibration Analysis

Underwater Vibration Monitoring

This webinar is ideal for CBM practitioners in Water & Wastewater, Food & Beverage, and any other industries where the reliability of wet or underwater assets are important to plant production and operation.

What's Coming
Sponsored Content
Back to top